Chemical Materials
Manta has 48 businesses under Chemical Materials in Dothan, AL
Featured Company Listings
CLAIMED
Categorized under Core wash or wax
Our 3-minute car washes allow you to stay in your car and have a beautiful car (both exterior and interior) without long wait times. And our eco-friendly practices, like biodegradable detergents and water recycling, clean your car with minimal environmental impact.
CLAIMED
Categorized under Steel
Sabel Steel is a progressive company founded in 1856 that is steeped in tradition with a history of customer service. As the Southeast continues to grow, the needs and desires of our customers change.
CLAIMED
Categorized under Stain Removers
512 North Shady Lane
Dothan, AL
(334) 258-1285
Categorized under Injection molding of plastics
About Derek Woessner
Derek A. Woessner, MD, FAAFP, specializes in sports medicine, concussion management and non-surgical orthopedics. He graduated cum laude from Berry College with a Bachelor of Science degree in Biochemistry in Rome, GA, and he earned his medical degree from Mercer University School of Medicine in Macon, GA. After medical school, he went to the Martin Army Community Hospital at Fort Benning, GA where he completed the family medicine residency program. Following Residency, Dr. Woessner was selected to serve as a special operations physician for the 3rd Ranger Battalion.
512 North Shady Lane
Dothan, AL
(334) 258-1355
Categorized under Injection molding of plastics
About David MacDonald
Dr. MacDonald graduated from Kirksville College of Osteopathic Medicine, completed his orthopedic residency at Michigan State University, and completed a fellowship of the hand, upper extremity, and microsurgery in Birmingham, Alabama.
Dr. MacDonald is a board certified orthopedic surgeon specializing in surgery of the hand and upper extremity. He spent two years stationed in Okinawa, Japan serving as the sole hand and upper extremity specialist in the Western Pacific. He was honored as a recipient of the Navy and Marine Corps Achievement Medal for his service.
512 North Shady Lane
Dothan, AL
(334) 429-6699
Categorized under Injection molding of plastics
About David Gloystein
Retiring from the U.S. Army after 22 years of service and selection for promotion to Colonel, Dr. David M. Gloystein, MD, has nearly two decades of experience in wartime spine and musculoskeletal injuries. Dr. Gloystein is a board-certified orthopedic and spine surgeon specializing in all conditions of the spine. He graduated from the United States Military Academy at West Point, NY. Despite being selected as one of the 2% of graduates allowed to attend medical school, he chose to seek leadership training as a combat engineer with the 101st Airborne Division.
512 North Shady Lane
Dothan, AL
(334) 258-8406
Categorized under Injection molding of plastics
About Michael Tucker, Jr.
Michael M. Tucker earned his medical degree from the Medical College of Georgia and completed his internship at Methodist Memorial Hospital in Memphis. He completed his training in orthopaedic surgery at the Campbell Clinic in Memphis.
Prior to joining Hughston Clinic, Dr. Tucker completed a sports medicine fellowship through the Hughston Foundation and he recently completed a foot and ankle fellowship at the American Sports Medicine Institute in Birmingham, Alabama.
Categorized under Injection molding of plastics
About Douglas Pahl
Douglas W. Pahl, MD, graduated from Baylor University in Waco, Texas then earned his medical degree from Meharry Medical College in Nashville, TN. He completed his internship and orthopaedic surgery residency at Dwight D. Eisenhower Army Medical Center at Fort Gordon, GA. After completion of his distinguished army career, Dr. Pahl elected to complete a fellowship in orthopaedic spine surgery at the prestigious Twin Cities Spine Center in Minneapolis, MN.
Dr. Pahl is a United States Army veteran of over twelve years and combat veteran of two major military conflicts during his career, Operation Joint Guard in eastern Europe and, more recently, Operation Enduring Freedom in Afghanistan.
Categorized under Injection molding of plastics
About John Waldrop
Dr. Waldrop attended Mercer University and the University of Georgia and earned his medical degree from the Medical College of Georgia. He did his residency at Greenville Hospital and Shriners for Crippled Children where he trained in orthopaedics.
Certified by the American Board of Orthopaedic Surgeons, Dr. Waldrop holds memberships in many professional societies including the American Medical Association and the American Academy of Orthopaedic Surgeons
Categorized under Injection molding of plastics
About David Rehak
David C. Rehak earned a degree in Engineering from Bucknell University and his medical degree at the University of Pittsburgh School of Medicine, completed an orthopaedic surgery residency at the University of Pittsburgh Medical Center and completed a fellowship in hand and upper extremity surgery at Allegheny General Hospital in Pittsburgh.
Dr. Rehak specializes in surgery of the hand, wrist, elbow and upper extremity, as well as orthopaedic surgery. He is board-certified and has a Certificate of Added Qualifications in Surgery of the Hand awarded by the American Board of Orthopaedic Surgery.
All Company Listings
CLAIMED
Categorized under Core wash or wax
Our 3-minute car washes allow you to stay in your car and have a beautiful car (both exterior and interior) without long wait times. And our eco-friendly practices, like biodegradable detergents and water recycling, clean your car with minimal environmental impact.
CLAIMED
Categorized under Steel
Sabel Steel is a progressive company founded in 1856 that is steeped in tradition with a history of customer service. As the Southeast continues to grow, the needs and desires of our customers change.
CLAIMED
Categorized under Stain Removers
Categorized under Wholesale Paint
Categorized under Fire Hose, Rubber
512 North Shady Lane
Dothan, AL
(334) 258-1285
Categorized under Injection molding of plastics
About Derek Woessner
Derek A. Woessner, MD, FAAFP, specializes in sports medicine, concussion management and non-surgical orthopedics. He graduated cum laude from Berry College with a Bachelor of Science degree in Biochemistry in Rome, GA, and he earned his medical degree from Mercer University School of Medicine in Macon, GA. After medical school, he went to the Martin Army Community Hospital at Fort Benning, GA where he completed the family medicine residency program. Following Residency, Dr. Woessner was selected to serve as a special operations physician for the 3rd Ranger Battalion.
512 North Shady Lane
Dothan, AL
(334) 258-1355
Categorized under Injection molding of plastics
About David MacDonald
Dr. MacDonald graduated from Kirksville College of Osteopathic Medicine, completed his orthopedic residency at Michigan State University, and completed a fellowship of the hand, upper extremity, and microsurgery in Birmingham, Alabama.
Dr. MacDonald is a board certified orthopedic surgeon specializing in surgery of the hand and upper extremity. He spent two years stationed in Okinawa, Japan serving as the sole hand and upper extremity specialist in the Western Pacific. He was honored as a recipient of the Navy and Marine Corps Achievement Medal for his service.
512 North Shady Lane
Dothan, AL
(334) 429-6699
Categorized under Injection molding of plastics
About David Gloystein
Retiring from the U.S. Army after 22 years of service and selection for promotion to Colonel, Dr. David M. Gloystein, MD, has nearly two decades of experience in wartime spine and musculoskeletal injuries. Dr. Gloystein is a board-certified orthopedic and spine surgeon specializing in all conditions of the spine. He graduated from the United States Military Academy at West Point, NY. Despite being selected as one of the 2% of graduates allowed to attend medical school, he chose to seek leadership training as a combat engineer with the 101st Airborne Division.
512 North Shady Lane
Dothan, AL
(334) 258-8406
Categorized under Injection molding of plastics
About Michael Tucker, Jr.
Michael M. Tucker earned his medical degree from the Medical College of Georgia and completed his internship at Methodist Memorial Hospital in Memphis. He completed his training in orthopaedic surgery at the Campbell Clinic in Memphis.
Prior to joining Hughston Clinic, Dr. Tucker completed a sports medicine fellowship through the Hughston Foundation and he recently completed a foot and ankle fellowship at the American Sports Medicine Institute in Birmingham, Alabama.
Categorized under Injection molding of plastics
About Douglas Pahl
Douglas W. Pahl, MD, graduated from Baylor University in Waco, Texas then earned his medical degree from Meharry Medical College in Nashville, TN. He completed his internship and orthopaedic surgery residency at Dwight D. Eisenhower Army Medical Center at Fort Gordon, GA. After completion of his distinguished army career, Dr. Pahl elected to complete a fellowship in orthopaedic spine surgery at the prestigious Twin Cities Spine Center in Minneapolis, MN.
Dr. Pahl is a United States Army veteran of over twelve years and combat veteran of two major military conflicts during his career, Operation Joint Guard in eastern Europe and, more recently, Operation Enduring Freedom in Afghanistan.
Categorized under Engraving of Plastics
Categorized under Concrete Block Manufacturers
Categorized under Sanitary Paper Products
Categorized under Steel Distributors and Warehouses
Categorized under Ready Mixed Concrete Manufacturers
Categorized under Roofing Materials Manufacturers
Categorized under Wholesale Oxygen
Categorized under Cotton Fabric, Rubber Lined Hose
Categorized under Injection molding of plastics
About John Waldrop
Dr. Waldrop attended Mercer University and the University of Georgia and earned his medical degree from the Medical College of Georgia. He did his residency at Greenville Hospital and Shriners for Crippled Children where he trained in orthopaedics.
Certified by the American Board of Orthopaedic Surgeons, Dr. Waldrop holds memberships in many professional societies including the American Medical Association and the American Academy of Orthopaedic Surgeons
Categorized under Injection molding of plastics
About David Rehak
David C. Rehak earned a degree in Engineering from Bucknell University and his medical degree at the University of Pittsburgh School of Medicine, completed an orthopaedic surgery residency at the University of Pittsburgh Medical Center and completed a fellowship in hand and upper extremity surgery at Allegheny General Hospital in Pittsburgh.
Dr. Rehak specializes in surgery of the hand, wrist, elbow and upper extremity, as well as orthopaedic surgery. He is board-certified and has a Certificate of Added Qualifications in Surgery of the Hand awarded by the American Board of Orthopaedic Surgery.
512 North Shady Lane
Dothan, AL
(334) 438-1460
Categorized under Injection molding of plastics
About Garland Gudger, Jr.
Jake Gudger, MD, graduated from University of Georgia in Athens with a degree in biology and went on to earn his medical degree from Mercer University School of Medicine in Savannah, Georgia. Dr. Gudger completed his residency in orthopaedic surgery at the Greenville Hospital System in Greenville, SC, where he served as Chief Orthopaedic Resident, was an AOA Resident Leadership Forum Recipient, and was awarded the Lilly M & GD Jackson Award for outstanding first year resident.
Categorized under Injection molding of plastics
About John Dorchak
John Dorchak earned his medical degree at Tulane University School of Medicine and completed his residency at the Naval Hospital in Oakland, California, and the University of California-Davis Medical Center in Sacramento.
He completed a fellowship in spine surgery with the Department of Neurosurgery and Orthopaedic Surgery at the University of Florida College of Medicine in Gainesville.
Categorized under Injection molding of plastics
About Randall Ruark
Dr. Ruark is a board certified orthopaedic surgeon specializing in hip and knee reconstruction. He received his undergraduate degree in electrical engineering from the Georgia Institute of Technology, Atlanta, GA, and he completed his pre-med coursework at Columbus State University in Columbus, GA. Dr. Ruark earned his medical degree and completed his orthopaedic surgery residency at the Medical College of Georgia in Augusta, GA. He completed an adult hip and knee reconstruction mini-fellowship at Emory University in Atlanta, GA.
Categorized under Roofing materials
Manufacturer of Metal Roofing & Siding as well as a retail seller for all components for metal buildings.
Categorized under Specialty cleaning
Categorized under Concrete Block Manufacturers
Categorized under Ready Mixed Concrete Manufacturers
Categorized under Cut Stone and Stone Products
Categorized under Concrete Products
Categorized under Injection molding of plastics
About Ryan Geringer
Ryan Geringer received his medical education and training at the Des Moines University College of Osteopathic Medicine and then moved on to complete his internship and residency in orthopaedic surgery through Michigan State University at Mount Clemens Regional Medical Center.
Dr. Geringer also completed a fellowship in sports medicine at the Hughston Foundation in Columbus.
512 North Shady Lane
Dothan, AL
(334) 453-5699
Categorized under Injection molding of plastics
About Fred Flandry
Dr. Flandry graduated from Tulane University College of Arts and Sciences and earned his medical degree from Tulane University School of Medicine. He completed a flexible internship at Charity Hospital in New Orleans and then a residency in Orthopaedic Surgery through Tulane University Affiliated Hospitals across the United States. After his residency, he completed a fellowship in Sports Medicine and Arthroscopic Surgery at the Hughston Clinic. After entering practice, he continued his education by taking multiple sabbaticals to study Orthopaedic Traumatology at major academic centers in the United States, Canada, Germany, Switzerland, and Amsterdam.
512 North Shady Lane
Dothan, AL
(334) 304-3556
Categorized under Injection molding of plastics
About L. Erik Westerlund
Erik Westerlund, MD, FACS, graduated from The University of Virginia with a Bachelor of Arts degree in Biological Sciences in Charlottesville, VA, and he earned his medical degree from Georgetown University School of Medicine in Washington, DC. After medical school, he went to the University of Virginia Health Sciences Center where he completed a general surgery internship and a post-doctoral research fellowship in Applied Orthopaedic Biomechanics.
Categorized under Injection molding of plastics
About James McGrory
James McGrory attended medical school at Vanderbilt University in Nashville, Tennessee, and completed his orthopaedic training at the Mayo Clinic. While there, he developed his expertise in total joint replacement of the hip and knee. He also completed a fellowship in spine surgery at the Texas Back Institute in 2011.
Prior to joining Hughston Clinic, Dr. McGrory practiced medicine with the United States Navy in addition to two years of private practice in Fort Worth, Texas.
512 North Shady Lane
Dothan, AL
(334) 686-0653
Categorized under Injection molding of plastics
About Champ Baker
Champ L. Baker, III MD, earned his medical degree from the Medical College of Georgia in Augusta before going on to complete his internship and orthopaedic surgery residency at the University of Pittsburgh Medical Center.
Prior to joining the Hughston Clinic, Dr. Baker completed a sports medicine fellowship at the Rush University Medical Center in Chicago and worked on the medical staff of the Chicago Bulls, Chicago White Sox, and Depaul University. Dr. Baker was granted the Certificate of added Qualification in Sports Medicine in 2012 by the American Board of Orthopaedic Surgery and re-certified in 2019.
Categorized under Boxes, Corrugated: Made From Purchased Materials
Browse Subcategories
Browse Cities
Birmingham (246)
Mobile (117)
Huntsville (83)
Montgomery (80)
Decatur (66)
Theodore (50)
Florence (45)
Athens (35)
Summerdale (35)
Tuscaloosa (35)
Bessemer (34)
Pelham (34)
Auburn (32)
Opelika (26)
Sylacauga (24)
Alabaster (23)
Cullman (23)
Anniston (22)
Gadsden (22)
Madison (22)
Muscle Shoals (22)
Foley (20)
Fairhope (19)
Phenix City (19)
Calera (18)
Tuscumbia (18)
Albertville (17)
Jasper (17)
Prattville (17)
Fort Payne (16)
Scottsboro (15)
Trussville (15)
Bay Minette (14)
Talladega (14)
Troy (13)
Vestavia (13)
Guntersville (12)
Pell City (12)
Axis (11)
Leeds (11)
Livingston (11)
Mountain Brook (11)
Clanton (10)
Enterprise (10)
Eufaula (10)
Hoover (10)
Irondale (10)
Northport (9)
Spanish Fort (9)
Wetumpka (9)
Demopolis (8)
Fairfield (8)
Gulf Shores (8)
Homewood (8)
Monroeville (8)
Selma (8)
Vestavia Hills (8)
Andalusia (7)
Boaz (7)
Daphne (7)
Atmore (6)
Cherokee (6)
Chickasaw (6)
Childersburg (6)
Hanceville (6)
Helena (6)
Loxley (6)
Mc Calla (6)
Russellville (6)
Saraland (6)
Ardmore (5)
Bridgeport (5)
Cottondale (5)
Greenville (5)
Gurley (5)
Hartford (5)
Hartselle (5)
Hueytown (5)
Lanett (5)
Lincoln (5)
McIntosh (5)
Millbrook (5)
Moody (5)
Moulton (5)
Newbern (5)
Pinson (5)
Rainbow City (5)
Robertsdale (5)
Satsuma (5)
Sheffield (5)
Warrior (5)
Winfield (5)
Alexander City (4)
Arab (4)
Attalla (4)
Dolomite (4)
Elberta (4)
Eutaw (4)
Falkville (4)
Fayette (4)
Flomaton (4)
Fyffe (4)
Geneva (4)
Heflin (4)
Leesburg (4)
Leighton (4)
Morris (4)
Moundville (4)
Oxford (4)
Ozark (4)
Rainsville (4)
Slocomb (4)
Springville (4)
Tallassee (4)
Trinity (4)
Abbeville (3)
Alabama Port (3)
Brewton (3)
Calvert (3)
Eight Mile (3)
Elkmont (3)
Evergreen (3)
Fruithurst (3)
Fultondale (3)
Haleyville (3)
Hamilton (3)
Killen (3)
Laceys Spring (3)
Lafayette (3)
Linden (3)
Lineville (3)
Maplesville (3)
Mount Meigs (3)
Mount Vernon (3)
New Brockton (3)
New Market (3)
Orange Beach (3)
Parrish (3)
Piedmont (3)
Prichard (3)
Ragland (3)
Saginaw (3)
Steele (3)
Union Springs (3)
Woodstock (3)
Adamsville (2)
Aliceville (2)
Alpine (2)
Ashville (2)
Banks (2)
Brent (2)
Burkville (2)
Centre (2)
Chatom (2)
Coosada (2)
Cordova (2)
Crossville (2)
Daleville (2)
Double Springs (2)
Elmore (2)
Florala (2)
Gardendale (2)
Grand Bay (2)
Grant (2)
Grove Hill (2)
Harpersville (2)
Harvest (2)
Hayden (2)
Henagar (2)
Ider (2)
Jackson (2)
Jacksonville (2)
Lowndesboro (2)
Maylene (2)
Muscadine (2)
Needham (2)
New Castle (2)
New Hope (2)
Ohatchee (2)
Oneonta (2)
Opp (2)
Pennington (2)
Quinton (2)
Safford (2)
Salem (2)
Samson (2)
Semmes (2)
Smiths Station (2)
Snead (2)
Stevenson (2)
Tanner (2)
Taylor (2)
Thomasville (2)
Tuskegee (2)
Vance (2)
Alberta (1)
Allgood (1)
Altoona (1)
Ariton (1)
Baileyton (1)
Bear Creek (1)
Billingsley (1)
Blountsville (1)
Brantley (1)
Brierfield (1)
Brilliant (1)
Brooklyn (1)
Brookwood (1)
Bucks (1)
Butler (1)
Camden (1)
Carrollton (1)
Center Point (1)
Centreville (1)
Chelsea (1)
Chunchula (1)
Citronelle (1)
Clay (1)
Collinsville (1)
Columbiana (1)
Cottonton (1)
Cowarts (1)
Crane Hill (1)
Creola (1)
Cropwell (1)
Dadeville (1)
Danville (1)
Deatsville (1)
Delmar (1)
Elba (1)
Equality (1)
Eva (1)
Fackler (1)
Five Points (1)
Fort Deposit (1)
Fort Mitchell (1)
Franklin (1)
Fruitdale (1)
Glen Allen (1)
Glencoe (1)
Gordon (1)
Graysville (1)
Greensboro (1)
Hampton Cove (1)
Hayneville (1)
Headland (1)
Hokes Bluff (1)
Hollywood (1)
Hope Hull (1)
Horton (1)
Indian Springs (1)
Irvington (1)
Jacksons Gap (1)
Jemison (1)
Lexington (1)
Lisman (1)
Loachapoka (1)
Locust Fork (1)
Luverne (1)
Marbury (1)
Marion (1)
Melvin (1)
Midland City (1)
Millry (1)
Montevallo (1)
Montrose (1)
Mulga (1)
Natural Bridge (1)
Nauvoo (1)
Newville (1)
Notasulga (1)
Odenville (1)
Perdido (1)
Pike Road (1)
Pinckard (1)
Red Bay (1)
Reform (1)
Remlap (1)
Roanoke (1)
Seale (1)
Shelby (1)
Shorter (1)
Silverhill (1)
Somerville (1)
Spruce Pine (1)
Stapleton (1)
Stockton (1)
Titus (1)
Toney (1)
Trafford (1)
Valley Grande (1)
Vernon (1)
Victoria (1)
Wedowee (1)
Westover (1)
Whistler (1)
Wilmer (1)
Wilsonville (1)
Woodville (1)