Calibration Services
Manta has 11 businesses under Calibration Services in Connecticut
Featured Company Listings
CLAIMED
Onsite Calibration
Scale And Balance Calibration
Pressure And Vacuum Calibration
Torque Calibration
Temperature And Humidity Calibration
Custom Calibration, Inc. is a family-owned, second-generation calibration laboratory in North Haven, Connecticut, accredited to ISO/IEC 17025:2017 by ANAB under Certificate AC-2671.
Onsite calibration is our specialty and has been since 1989. We come to your facility across all of Connecticut, Massachusetts and Rhode Island, plus lower New York: NYC, Long Island, Westchester and the Hudson Valley.
Accredited scope: scales and balances 0.001 g to 5,000 g and 1 to 500 lb; pressure to 10,000 psig plus vacuum; torque to 90 lbf-in; temperature -100 to 1,000 C with RTD and TC simulation; humidity 10 to 95 %RH; dimensional including calipers, micrometers and pin gauges; clamp meter current to 400 A; tachometers and timers.
We also calibrate multimeters, power supplies, pipettes and pH meters NIST-traceable. Not on our accredited scope.
Turnaround 3-5 business days, rush available. Free pickup and delivery within 30 miles, available farther for a delivery charge. Mon-Fri 7 AM to 3 PM.
Categorized under Calibration and certification
Fully accredited dimensional and mechanical calibration. Serving customers in 35 states. On-Site and lab services. New facility with environmentally controlled calibration room.
Categorized under Calibration Services
Categorized under Calibration and certification
GiCi is ISO 17025-2005 accredited, and is ISO 9001-2008 certified.
Dr. Shapiro invented the Dynalyzer system and provides expert service for Dynalyzers and Voltage dividers. We have capability to +/- 100 KV, or 150 KV to ground. Using computer control, we provide repeatable and accurate measurements. With our Fluke meter and scope test set, we provide accuate certification for your digital volt meters and oscilloscopes. While we repair, and rebuild high voltage test equipment, we do not repair oscilloscopes and meters. Our experiencee shows that 95% of such equipment by HP, Agilent, Fluke, and Tektronix is in spec, and the remained requires a slight tweak. Call me with your calibration needs. We offer indivudalized service to meet your needs.
Categorized under Calibration Services
Categorized under Calibration Services
Categorized under Calibration Services
Categorized under Calibration Services
Categorized under Calibration Services
Categorized under Calibration Services
All Company Listings
CLAIMED
Onsite Calibration
Scale And Balance Calibration
Pressure And Vacuum Calibration
Torque Calibration
Temperature And Humidity Calibration
Custom Calibration, Inc. is a family-owned, second-generation calibration laboratory in North Haven, Connecticut, accredited to ISO/IEC 17025:2017 by ANAB under Certificate AC-2671.
Onsite calibration is our specialty and has been since 1989. We come to your facility across all of Connecticut, Massachusetts and Rhode Island, plus lower New York: NYC, Long Island, Westchester and the Hudson Valley.
Accredited scope: scales and balances 0.001 g to 5,000 g and 1 to 500 lb; pressure to 10,000 psig plus vacuum; torque to 90 lbf-in; temperature -100 to 1,000 C with RTD and TC simulation; humidity 10 to 95 %RH; dimensional including calipers, micrometers and pin gauges; clamp meter current to 400 A; tachometers and timers.
We also calibrate multimeters, power supplies, pipettes and pH meters NIST-traceable. Not on our accredited scope.
Turnaround 3-5 business days, rush available. Free pickup and delivery within 30 miles, available farther for a delivery charge. Mon-Fri 7 AM to 3 PM.
CLAIMED
Categorized under Calibration Services
Categorized under Calibration Services
Categorized under Calibration Services
Categorized under Calibration Services
Categorized under Calibration Services
Categorized under Calibration and certification
Fully accredited dimensional and mechanical calibration. Serving customers in 35 states. On-Site and lab services. New facility with environmentally controlled calibration room.
Categorized under Calibration Services
Categorized under Calibration Services
Categorized under Calibration Services
Categorized under Calibration and certification
GiCi is ISO 17025-2005 accredited, and is ISO 9001-2008 certified.
Dr. Shapiro invented the Dynalyzer system and provides expert service for Dynalyzers and Voltage dividers. We have capability to +/- 100 KV, or 150 KV to ground. Using computer control, we provide repeatable and accurate measurements. With our Fluke meter and scope test set, we provide accuate certification for your digital volt meters and oscilloscopes. While we repair, and rebuild high voltage test equipment, we do not repair oscilloscopes and meters. Our experiencee shows that 95% of such equipment by HP, Agilent, Fluke, and Tektronix is in spec, and the remained requires a slight tweak. Call me with your calibration needs. We offer indivudalized service to meet your needs.
Browse Subcategories
Calibration Services (11)
Forensic Consultants (22)
Browse Cities
New Hartford (1)
Newington (1)