Chemical Materials
Manta has 47 businesses under Chemical Materials in Lagrange, GA
Featured Company Listings
CLAIMED
Industrial Paint Stripping
Paint Hook And Hanger Cleaning
Rejected Parts Recovery
Unpaint Services specializes in removing paint from paint line fixtures and fabricated metal parts.
Removing paint buildup from paint hooks, hangers, and racks is our specialty. Manufacturers and industrial coaters who operate powder or e-coat lines will save time and money by leaving this task to us. We guaranty fast turnaround and develop procedures to help your fixtures last as long as possible.
Manufactured parts rejected by quality control, due to paint or e-coating issues, can be stripped to a like new condition. Parts that normally go to the recycling bin can now have a second chance and save losses from paint defects.
FREE samples are offered to give quotes and an example of our work quality.
107 Calumet Center Road
Lagrange, GA
(706) 707-2915
Categorized under Injection molding of plastics
About L. Erik Westerlund
Erik Westerlund, MD, FACS, graduated from The University of Virginia with a Bachelor of Arts degree in Biological Sciences in Charlottesville, VA, and he earned his medical degree from Georgetown University School of Medicine in Washington, DC. After medical school, he went to the University of Virginia Health Sciences Center where he completed a general surgery internship and a post-doctoral research fellowship in Applied Orthopaedic Biomechanics.
107 Calumet Center Road
Lagrange, GA
(706) 670-6604
Categorized under Injection molding of plastics
About Randall Ruark
Dr. Ruark is a board certified orthopaedic surgeon specializing in hip and knee reconstruction. He received his undergraduate degree in electrical engineering from the Georgia Institute of Technology, Atlanta, GA, and he completed his pre-med coursework at Columbus State University in Columbus, GA. Dr. Ruark earned his medical degree and completed his orthopaedic surgery residency at the Medical College of Georgia in Augusta, GA. He completed an adult hip and knee reconstruction mini-fellowship at Emory University in Atlanta, GA.
107 Calumet Center Road
Lagrange, GA
(706) 287-8388
Categorized under Injection molding of plastics
About David Rehak
David C. Rehak earned a degree in Engineering from Bucknell University and his medical degree at the University of Pittsburgh School of Medicine, completed an orthopaedic surgery residency at the University of Pittsburgh Medical Center and completed a fellowship in hand and upper extremity surgery at Allegheny General Hospital in Pittsburgh.
Dr. Rehak specializes in surgery of the hand, wrist, elbow and upper extremity, as well as orthopaedic surgery. He is board-certified and has a Certificate of Added Qualifications in Surgery of the Hand awarded by the American Board of Orthopaedic Surgery.
107 Calumet Center Road
Lagrange, GA
(706) 287-8721
Categorized under Injection molding of plastics
About James McGrory
James McGrory attended medical school at Vanderbilt University in Nashville, Tennessee, and completed his orthopaedic training at the Mayo Clinic. While there, he developed his expertise in total joint replacement of the hip and knee. He also completed a fellowship in spine surgery at the Texas Back Institute in 2011.
Prior to joining Hughston Clinic, Dr. McGrory practiced medicine with the United States Navy in addition to two years of private practice in Fort Worth, Texas.
107 Calumet Center Road
Lagrange, GA
(706) 967-2260
Categorized under Injection molding of plastics
About David Antekeier
David P. Antekeier, MD, received his undergraduate degree in physiology from Eastern Michigan University, graduating magna cum laude, and his medical degree in Detroit from Wayne State University. He completed his general surgery internship and his orthopaedic residency at University of Louisville in Louisville, KY. Additionally, he advanced his training through a fellowship in pediatric orthopaedics at Cincinnati Children's Medical Center in Cincinnati, OH, which concentrated on spinal deformity and sports medicine. Dr. Antekeier is a veteran; in fact, it was his training and service at Fort Benning as a Ranger and Airborne Medic that brought him to the Columbus area early in his medical career.
107 Calumet Center Road
Lagrange, GA
(706) 873-5051
Categorized under Injection molding of plastics
About Garland Gudger, Jr.
Jake Gudger, MD, graduated from University of Georgia in Athens with a degree in biology and went on to earn his medical degree from Mercer University School of Medicine in Savannah, Georgia. Dr. Gudger completed his residency in orthopaedic surgery at the Greenville Hospital System in Greenville, SC, where he served as Chief Orthopaedic Resident, was an AOA Resident Leadership Forum Recipient, and was awarded the Lilly M & GD Jackson Award for outstanding first year resident.
107 Calumet Center Road
Lagrange, GA
(706) 989-6948
Categorized under Injection molding of plastics
About Michael Tucker, Jr.
Michael M. Tucker earned his medical degree from the Medical College of Georgia and completed his internship at Methodist Memorial Hospital in Memphis. He completed his training in orthopaedic surgery at the Campbell Clinic in Memphis.
Prior to joining Hughston Clinic, Dr. Tucker completed a sports medicine fellowship through the Hughston Foundation and he recently completed a foot and ankle fellowship at the American Sports Medicine Institute in Birmingham, Alabama.
107 Calumet Center Road
Lagrange, GA
(706) 740-9623
Categorized under Injection molding of plastics
About Patrick Fernicola
Patrick Fernicola received his undergraduate and medical degrees respectively from Georgetown University and Georgetown University School of Medicine in Washington, D.C.
He completed his internship and orthopaedic residency at the Madigan Army Medical Center in Ft. Lewis, Washington.
Dr. Fernicola served in the United States Army for thirteen years, rising to the rank of Lieutenant Colonel and Chief of Orthopaedic Surgery at Martin Army Community Hospital.
107 Calumet Center Road
Lagrange, GA
(706) 538-4820
Categorized under Injection molding of plastics
About Matthew Stewart
Matthew G. Stewart, MD, practices general orthopaedics with a special interest in foot and ankle reconstruction and total joint replacements (hip, knee and ankle). Originally from Columbus, GA, he graduated magna cum laude from Auburn University with an undergraduate degree in biomedical sciences. He went on to earn his medical degree at the Medical College of Georgia in Augusta, GA. He completed his residency in orthopaedic surgery at the University of Tennessee-Campbell Clinic in Memphis where he served as Chief Orthopaedic Resident. Before becoming a member of our staff, Dr. Stewart completed a fellowship specializing in foot and ankle surgery at Duke University.
All Company Listings
CLAIMED
Cleaners
CLAIMED
Categorized under Sheeting, Rubber or Rubberized Fabric
CLAIMED
Industrial Paint Stripping
Paint Hook And Hanger Cleaning
Rejected Parts Recovery
Unpaint Services specializes in removing paint from paint line fixtures and fabricated metal parts.
Removing paint buildup from paint hooks, hangers, and racks is our specialty. Manufacturers and industrial coaters who operate powder or e-coat lines will save time and money by leaving this task to us. We guaranty fast turnaround and develop procedures to help your fixtures last as long as possible.
Manufactured parts rejected by quality control, due to paint or e-coating issues, can be stripped to a like new condition. Parts that normally go to the recycling bin can now have a second chance and save losses from paint defects.
FREE samples are offered to give quotes and an example of our work quality.
Categorized under Insulation Material Manufacturers
Categorized under Alkalines and Chlorine
Categorized under Mold Makers
Categorized under Blow Molded Plastic Manufacturers
35 South Lafayette Square
Lagrange, GA
(706) 882-3701
Categorized under Uppers
107 Calumet Center Road
Lagrange, GA
(706) 707-2915
Categorized under Injection molding of plastics
About L. Erik Westerlund
Erik Westerlund, MD, FACS, graduated from The University of Virginia with a Bachelor of Arts degree in Biological Sciences in Charlottesville, VA, and he earned his medical degree from Georgetown University School of Medicine in Washington, DC. After medical school, he went to the University of Virginia Health Sciences Center where he completed a general surgery internship and a post-doctoral research fellowship in Applied Orthopaedic Biomechanics.
Categorized under Blow Molded Plastic Manufacturers
Categorized under Plastics Hardware and Building Products
Categorized under Chemicals, Industrial and Heavy
Categorized under Oil Seals, Rubber
Categorized under Plastics Containers, Except Foam
Categorized under Mats and Matting Manufacturers
Categorized under Cement Manufacturers
Categorized under Mats and Matting Manufacturers
107 Calumet Center Road
Lagrange, GA
(706) 670-6604
Categorized under Injection molding of plastics
About Randall Ruark
Dr. Ruark is a board certified orthopaedic surgeon specializing in hip and knee reconstruction. He received his undergraduate degree in electrical engineering from the Georgia Institute of Technology, Atlanta, GA, and he completed his pre-med coursework at Columbus State University in Columbus, GA. Dr. Ruark earned his medical degree and completed his orthopaedic surgery residency at the Medical College of Georgia in Augusta, GA. He completed an adult hip and knee reconstruction mini-fellowship at Emory University in Atlanta, GA.
Categorized under Folding paperboard boxes
Categorized under Ready Mixed Concrete Manufacturers
Categorized under Blow Molded Plastic Manufacturers
Categorized under Oil and Grease Seals Manufacturers
Categorized under Wholesale Chemicals
107 Calumet Center Road
Lagrange, GA
(706) 287-8388
Categorized under Injection molding of plastics
About David Rehak
David C. Rehak earned a degree in Engineering from Bucknell University and his medical degree at the University of Pittsburgh School of Medicine, completed an orthopaedic surgery residency at the University of Pittsburgh Medical Center and completed a fellowship in hand and upper extremity surgery at Allegheny General Hospital in Pittsburgh.
Dr. Rehak specializes in surgery of the hand, wrist, elbow and upper extremity, as well as orthopaedic surgery. He is board-certified and has a Certificate of Added Qualifications in Surgery of the Hand awarded by the American Board of Orthopaedic Surgery.
107 Calumet Center Road
Lagrange, GA
(706) 287-8721
Categorized under Injection molding of plastics
About James McGrory
James McGrory attended medical school at Vanderbilt University in Nashville, Tennessee, and completed his orthopaedic training at the Mayo Clinic. While there, he developed his expertise in total joint replacement of the hip and knee. He also completed a fellowship in spine surgery at the Texas Back Institute in 2011.
Prior to joining Hughston Clinic, Dr. McGrory practiced medicine with the United States Navy in addition to two years of private practice in Fort Worth, Texas.
107 Calumet Center Road
Lagrange, GA
(706) 967-2260
Categorized under Injection molding of plastics
About David Antekeier
David P. Antekeier, MD, received his undergraduate degree in physiology from Eastern Michigan University, graduating magna cum laude, and his medical degree in Detroit from Wayne State University. He completed his general surgery internship and his orthopaedic residency at University of Louisville in Louisville, KY. Additionally, he advanced his training through a fellowship in pediatric orthopaedics at Cincinnati Children's Medical Center in Cincinnati, OH, which concentrated on spinal deformity and sports medicine. Dr. Antekeier is a veteran; in fact, it was his training and service at Fort Benning as a Ranger and Airborne Medic that brought him to the Columbus area early in his medical career.
Categorized under Steel Distributors and Warehouses
Categorized under Polyethylene Materials and Prods Manufacturers
Categorized under Temperature Controls, Automatic
Categorized under Trays, Plastics
Categorized under Steel Distributors and Warehouses
Categorized under Polyethylene Materials and Prods Manufacturers
Categorized under Aluminum Fabricators
Categorized under Steel Distributors and Warehouses
107 Calumet Center Road
Lagrange, GA
(706) 873-5051
Categorized under Injection molding of plastics
About Garland Gudger, Jr.
Jake Gudger, MD, graduated from University of Georgia in Athens with a degree in biology and went on to earn his medical degree from Mercer University School of Medicine in Savannah, Georgia. Dr. Gudger completed his residency in orthopaedic surgery at the Greenville Hospital System in Greenville, SC, where he served as Chief Orthopaedic Resident, was an AOA Resident Leadership Forum Recipient, and was awarded the Lilly M & GD Jackson Award for outstanding first year resident.
Browse Subcategories
There are 304 cities in
Georgia
with businesses in the Chemical Materials category. We've listed the top ten (based on number of businesses) above.
See all cities for Chemical Materials in
Georgia .